Workshop
Brand: Park Tool
Model: QKCT5
A chain tool that is small enough to go anywhere, yet which performs like a full size workshop toolFine thread and slide-away T-handle gives plenty of pressure at the pin head to move stubborn chain rivetsIncludes a loosening shelf to release stiff links after assemblyReplaceable driving pin headWor..
£25.00
Ex Tax:£25.00
Brand: Park Tool
Model: QKCTP4K
The CTP-4K includes four (4) replacement chain tool pins and one 5/32 inch ball bearingTo replace the chain tool pin, unscrew the cap, and pull out the old pinUse care not to lose the ball bearing beneath the pinInstall the new pin and replace the capFits CT-4 CT-4.2 and CT-4.3 tools..
£19.00
Ex Tax:£19.00
Brand: Park Tool
Model: QKCWP7C
The CWP-7 is a compact crank puller with a built-in 8mm hex for removing crank boltsIncludes two rotating tips (11.3mm and 16.3mm) so it can be used to remove splined Octalink and ISIS Drive crank arms, as well as square-holed crank armsA must have multi-fit crank puller for the home mechanicMade in..
£19.00
Ex Tax:£19.00
Brand: Park Tool
Model: QKDAG22
The DAG-2.2 is an indispensable shop tool that can be used to both measure and straighten misaligned derailleur hangers, solving a high percentage of shifting problemsGauge bar made from heavy gauge, chrome plated steelUpdated with tighter tolerances for improved accuracyAdjusts to fit 20" to 29"+ w..
£68.00
Ex Tax:£68.00
Brand: Park Tool
Model: QKDAG3
An alignment gauge is essential for diagnosing and repairing bent or misaligned derailleur hangers, often the source of shifting problemsThe DAG-3 features an all-new design, engineered and built to be light, accurate and versatileThe sliding indicator can measure derailleur hanger alignment against..
£105.00
Ex Tax:£105.00
Brand: Park Tool
Model: QKDC2
Accurately measure seat posts, head tubes, bearings, spoke diameters and just about anything else you can think ofThe DC-2 is a precision made instrument built with stainless steel mechanisms and improved, more positive buttons and a robust screw-on battery coverAn indispensable shop tool able to me..
£60.00
Ex Tax:£60.00
Brand: Park Tool
Model: QKDCA1
The DCA-1 installs onto most digital, dial, or vernier calipers (including the Park Tool DC-1) and features protruding contact points that allow measurement of the centre of the braking surface, bypassing the unworn edge to ensure an accurate measurement The conical end points of the DCA-1 can also ..
£19.00
Ex Tax:£19.00
Brand: Park Tool
Model: QKDCW1C
Ideal cone wrench for the home mechanicSmall in size but very useful due to the double ended featureHigh strength heat treated steel with a nickel plate finish13mm and 14mmMade in the USA and covered by Park Tool's legendary limited lifetime warranty..
£7.99
Ex Tax:£7.99
Brand: Park Tool
Model: QKDF1
The DF-1 Dummy Fork is an essential companion for any scenario that requires dropping the fork from the bicycle, enabling complete removal of the fork while keeping the handlebars, headset spacers, and brake caliper organizedThe DF-1 installs into the headset and is held in place using the bikes ste..
£41.00
Ex Tax:£41.00
Brand: Park Tool
Model: QKDH1
Also called a sleeping hub, the DH-1 fits into a frames rear dropouts to replace the rear wheel for chain cleaning and transportThe unique design allows shifting with the DH-1 installedWorks with all derailleur and 1/8" chainsWorks on frames with both open-type dropouts and 12mm thru axle dropouts..
£22.99
Ex Tax:£22.99
Brand: Park Tool
Model: QKDHD2
Professional quality component hex driver precisely machined to exact standards to ensure a perfect fit on compatible component fastenersFeaturing an ergonomic, CNC machined, perfectly balanced 6061 aluminium handle hard anodized to take the rigours of everyday use..
£31.00
Ex Tax:£31.00