Workshop
Brand: Park Tool
Model: QK738
The #738 is used to ream head tubes using the 1.5" integrated headset standardUsed in conjunction with the HTR-1 Head Tube Reaming and Facing Set, 690-XL Facing Cutter and 750.2 Centering Cone AdapterGenuine Park Tool replacement part..
£140.00
Ex Tax:£140.00
Brand: Park Tool
Model: QK744
The #744 is used to ream BB86/92 bottom bracket shells to an inside diameter of 40.98mmUsed in conjunction with the HTR-1 Head Tube Reaming and Facing Set, 690-XL Facing Cutter and 750.2 Centering Cone Adapter..
£140.00
Ex Tax:£140.00
Brand: Park Tool
Model: QK750
The 750.2 Centring cone adapter increases the size of the centering cone of the HTR-1 Head tube Reaming and Facing SetFits headtubes with an inside diameter of 38-60mmSeveral headset standards use large head tube inside diametersThe 750.2 will allow the HTR-1 to be used with the IS (intergrated head..
£36.00
Ex Tax:£36.00
Brand: Park Tool
Model: QK7512
Part number 751.2, 30.1mm reamer is included with HTR-1For headset cups with 30.2mm outside diameter, common on 1" steering column bikes..
£93.00
Ex Tax:£93.00
Brand: Park Tool
Model: QK752
The #752 is used to ream BB30 bottom bracket shells to an ID of 41.94mmMust be used with the HTR-1 Head Tube Reaming and Facing Set with a QK750 centering cone adapter..
£224.99
Ex Tax:£224.99
Brand: Park Tool
Model: QK7542
1-1/8" headtube reamer for use with the Park HTR-1 and HTR-1B headtube facing and reaming setGenuine Park Tool replacement part..
£105.00
Ex Tax:£105.00
Brand: Park Tool
Model: QK756S2
The 756S.2 Reaming Cutter is used to machine head tubes using IS41 or Cane Creek Standard headsets (41mm x 45°)Must be used with the 690-XL Oversized Facer (not included) or the 687 Reamer StopIncludes part #755 Spacer for deeper cuts on lower IS41 headsets..
£184.99
Ex Tax:£184.99
Brand: Park Tool
Model: QK7582
The Park Tool 758.2 will ream and face the head tubes of bikes that use the OnePointFive Interface StandardThe 758.2 is designed for use with the Park Tool HTR-1 or HTR-1B Headtube Facer and ReamerMust also be used with the 750 Centering Cone Adapter to ensure correct alignment1.9516" (49.57mm) diam..
£400.00
Ex Tax:£400.00
Brand: Park Tool
Model: QK761S2
The 761S.2 Reamer is used to machine head tubes using IS42 or Campagnolo®: Standard headset (42mm x 45°)Must be used with the 690-XL Facer (not included) or the 687 Reamer StopIncludes part #755 Spacer for deeper cuts on lower IS42 headsets..
£219.99
Ex Tax:£219.99
Brand: Park Tool
Model: QK764
The #764 pilot is used when facing BB86/92 bottom bracket shells and reaming is not requiredUsed in conjunction with the HTR-1 Head Tube Reaming and Facing Set, 690-XL Facing Cutter and 750.2 Centering Cone Adapter..
£16.00
Ex Tax:£16.00
