Menu
Your Cart

Dyna Plug Air tubeless Road tyre repair and inflation kit - Black

Dyna Plug Air tubeless Road tyre repair and inflation kit - Black
Dyna Plug Air tubeless Road tyre repair and inflation kit - Black
Dyna Plug Air tubeless Road tyre repair and inflation kit - Black
Dyna Plug Air tubeless Road tyre repair and inflation kit - Black
Dyna Plug Air tubeless Road tyre repair and inflation kit - Black
Dyna Plug Air tubeless Road tyre repair and inflation kit - Black
Dyna Plug Air tubeless Road tyre repair and inflation kit - Black
£55.00
Ex Tax: £55.00
  • Brand: Dynaplug
  • Model: DP0016
  • Weight: 0.10kg
  • SKU: DP0016

Available Options

  • An all in one tyre repair and reinflation solution, there is no faster way to get yourself back up and rolling than the Dynaplug Air
  • Dynaplug is the fastest, easiest and all-round best way to repair a tubeless tyre mid-ride. When needed, just remove whatever caused the puncture, firmly push the novel insertion tube straight into the hole and extract the tool depositing the repair plug in the tyre, done!
  • The Air system has an added twist. If a tyre has lost too much pressure, just discharge the CO2 cartridge to reinflate the tyre before withdrawing the plug insertion tool, leaving you ready to go in seconds
  • The sealant-friendly repair plug is a unique viscoelastic impregnated rubber that bonds instantly and permanently with your tyre, and the nonabrasive brass tip will not scratch your rim or puncture your rim tape
  • No need to remove the tyre, no messy glues or solvents, just plug and ride!
  • Shorter Road version designed not to bottom out when used on narrower road slicks. For MTB tyres please use our MTB Air with a longer insertion tube to get past thicker MTB treads
  • A plug tail can be snipped off later if it bothers you; trim to about 4mm long depending on the location
  • CO2 can be dangerous, please read the instructions fully and wear gloves and eye protection, it's also a good idea to give the Air system a try at home before you need to do it 'in the field'
  • Kit features a precision machined air valve body, stainless steel repair nozzle/insertion tube, 4 x soft nose standard plugs and a storage pouch
  • In addition, there's an air hose for CO2 inflation if you just need to air up through the valve stem
  • Made with pride in the USA using patented technology and warrantied for life under normal usage
Brand: DT Swiss
A special tool for holding 0.6 - 0.8 mm bladed spokes whilst wheel building or truingHolds bladed spoke securely and allows nipples to be tensionedDes..
£19.99
Ex Tax:£19.99
Brand: DT Swiss
A special tool for holding Aerolite bladed spokes whilst wheel building or truingHolds bladed spoke securely and allows nipples to be tensionedDesigne..
£15.00
Ex Tax:£15.00
Brand: DT Swiss
A special tool for holding wider Aero Comp or New Aero bladed spokes whilst wheel building or truingHolds bladed spoke securely and allows nipples to ..
£15.00
Ex Tax:£15.00
Brand: DT Swiss
A super light and portable aluminium spoke tool, ideal for tourers and bike packersIncludes standard spoke interface, alongside a torx nipple interfac..
£15.00
Ex Tax:£15.00
Brand: DT Swiss
Precision crafted in Switzerland to work perfectly with DT's stunning proline truing stand, these gauges are accurate to within 0.01 mm and can show u..
£109.99
Ex Tax:£109.99
Brand: DT Swiss
Tool for removing the threaded cap on certain DiCUT wheelsPlease consult your wheel's service manual before ordering this tool to see whether it is re..
£39.99
Ex Tax:£39.99
Brand: DT Swiss
Tool for removing the threaded cap on certain DiCUT wheelsPlease consult your wheel's service manual before ordering this tool to see whether it is re..
£39.99
Ex Tax:£39.99
Brand: DT Swiss
Replacement digital dial for DT Swiss digital tensionmeter..
£410.00
Ex Tax:£410.00
Brand: DT Swiss
Replacement axle disassembly tool for 15 mm axles..
£19.99
Ex Tax:£19.99
Brand: DT Swiss
A dedicated press and drift for the safe removal and installation of the driveside rear hub bearing from Ratchet EXP system rear hubsUse in conjunctio..
£28.00
Ex Tax:£28.00
Brand: DT Swiss
Front bearing installation cylinder for front DT Onyx hubsPlease consult your wheel's service manual before ordering this tool to see whether it is re..
£19.99
Ex Tax:£19.99
Brand: DT Swiss
Revised tool for installing the drive side hub shell seal on DT Ratchet hubsEnsures the seal is aligned correctly and not damaged during installation,..
£19.99
Ex Tax:£19.99