Menu
Your Cart

DT Swiss Ring nut tool for Ratchet drive rear hubs

DT Swiss Ring nut tool for Ratchet drive rear hubs
DT Swiss Ring nut tool for Ratchet drive rear hubs
DT Swiss Ring nut tool for Ratchet drive rear hubs
DT Swiss Ring nut tool for Ratchet drive rear hubs
DT Swiss Ring nut tool for Ratchet drive rear hubs
£59.99
Ex Tax: £59.99
  • Brand: DT Swiss
  • Model: HBDT835
  • Weight: 0.08kg
  • SKU: HBDT835

Available Options

  • Ring Nut tool required for removing and replacing inner bearings on ratchet drive rear hubs, which are located behind the internal ring nut
  • Only works on twin Ratchet drive hubs such as the original 240s and 350 as well as those found on higher end complete wheels, for the new Ratchet EXP system please use HBDT6106S, for pawl drive hubs please use tool HBDT5266
  • Simple to use, and fits into a vice for workshop use, do not over tighten the vice in use as this can crush the tool
Brand: DT Swiss
A special tool for holding 0.6 - 0.8 mm bladed spokes whilst wheel building or truingHolds bladed spoke securely and allows nipples to be tensionedDes..
£19.99
Ex Tax:£19.99
Brand: DT Swiss
A special tool for holding Aerolite bladed spokes whilst wheel building or truingHolds bladed spoke securely and allows nipples to be tensionedDesigne..
£15.00
Ex Tax:£15.00
Brand: DT Swiss
A special tool for holding wider Aero Comp or New Aero bladed spokes whilst wheel building or truingHolds bladed spoke securely and allows nipples to ..
£15.00
Ex Tax:£15.00
Brand: DT Swiss
A super light and portable aluminium spoke tool, ideal for tourers and bike packersIncludes standard spoke interface, alongside a torx nipple interfac..
£15.00
Ex Tax:£15.00
Brand: DT Swiss
Precision crafted in Switzerland to work perfectly with DT's stunning proline truing stand, these gauges are accurate to within 0.01 mm and can show u..
£109.99
Ex Tax:£109.99
Brand: DT Swiss
Tool for removing the threaded cap on certain DiCUT wheelsPlease consult your wheel's service manual before ordering this tool to see whether it is re..
£39.99
Ex Tax:£39.99
Brand: DT Swiss
Tool for removing the threaded cap on certain DiCUT wheelsPlease consult your wheel's service manual before ordering this tool to see whether it is re..
£39.99
Ex Tax:£39.99
Brand: DT Swiss
Replacement digital dial for DT Swiss digital tensionmeter..
£410.00
Ex Tax:£410.00
Brand: DT Swiss
Replacement axle disassembly tool for 15 mm axles..
£19.99
Ex Tax:£19.99
Brand: DT Swiss
A dedicated press and drift for the safe removal and installation of the driveside rear hub bearing from Ratchet EXP system rear hubsUse in conjunctio..
£28.00
Ex Tax:£28.00
Brand: DT Swiss
Front bearing installation cylinder for front DT Onyx hubsPlease consult your wheel's service manual before ordering this tool to see whether it is re..
£19.99
Ex Tax:£19.99
Brand: DT Swiss
Revised tool for installing the drive side hub shell seal on DT Ratchet hubsEnsures the seal is aligned correctly and not damaged during installation,..
£19.99
Ex Tax:£19.99