Menu
Your Cart

Park Tool LRT-1 - Bosch Gen 2 Lockring Tool

Park Tool LRT-1 - Bosch Gen 2 Lockring Tool
Park Tool LRT-1 - Bosch Gen 2 Lockring Tool
Park Tool LRT-1 - Bosch Gen 2 Lockring Tool
Park Tool LRT-1 - Bosch Gen 2 Lockring Tool
Park Tool LRT-1 - Bosch Gen 2 Lockring Tool
Park Tool LRT-1 - Bosch Gen 2 Lockring Tool
Park Tool LRT-1 - Bosch Gen 2 Lockring Tool
£33.00
Ex Tax: £33.00
  • Brand: Park Tool
  • Model: QKLRT1
  • Weight: 0.26kg
  • SKU: QKLRT1

Available Options

  • The LRT-1 is designed and built to remove and install the lockring that retains the front chainrings found on Bosch® Gen 2 e-bike motors after crank arm is removed
  • Fits Bosch® Active Line (chainrings less than 20 teeth), Performance Line and Performance Line CX models
  • For lockrings with 50mm outside diameter with 8 notches
  • Replacement for Bosch® 0275009003 tool
  • Torque wrench compatible 3/8" square drive
  • Constructed of 4140 heat treated steel and plated for long life
Brand: DT Swiss
A special tool for holding 0.6 - 0.8 mm bladed spokes whilst wheel building or truingHolds bladed spoke securely and allows nipples to be tensionedDes..
£19.99
Ex Tax:£19.99
Brand: DT Swiss
A special tool for holding Aerolite bladed spokes whilst wheel building or truingHolds bladed spoke securely and allows nipples to be tensionedDesigne..
£15.00
Ex Tax:£15.00
Brand: DT Swiss
A special tool for holding wider Aero Comp or New Aero bladed spokes whilst wheel building or truingHolds bladed spoke securely and allows nipples to ..
£15.00
Ex Tax:£15.00
Brand: DT Swiss
A super light and portable aluminium spoke tool, ideal for tourers and bike packersIncludes standard spoke interface, alongside a torx nipple interfac..
£15.00
Ex Tax:£15.00
Brand: DT Swiss
Precision crafted in Switzerland to work perfectly with DT's stunning proline truing stand, these gauges are accurate to within 0.01 mm and can show u..
£109.99
Ex Tax:£109.99
Brand: DT Swiss
Tool for removing the threaded cap on certain DiCUT wheelsPlease consult your wheel's service manual before ordering this tool to see whether it is re..
£39.99
Ex Tax:£39.99
Brand: DT Swiss
Tool for removing the threaded cap on certain DiCUT wheelsPlease consult your wheel's service manual before ordering this tool to see whether it is re..
£39.99
Ex Tax:£39.99
Brand: DT Swiss
Replacement digital dial for DT Swiss digital tensionmeter..
£410.00
Ex Tax:£410.00
Brand: DT Swiss
Replacement axle disassembly tool for 15 mm axles..
£19.99
Ex Tax:£19.99
Brand: DT Swiss
A dedicated press and drift for the safe removal and installation of the driveside rear hub bearing from Ratchet EXP system rear hubsUse in conjunctio..
£28.00
Ex Tax:£28.00
Brand: DT Swiss
Front bearing installation cylinder for front DT Onyx hubsPlease consult your wheel's service manual before ordering this tool to see whether it is re..
£19.99
Ex Tax:£19.99
Brand: DT Swiss
Revised tool for installing the drive side hub shell seal on DT Ratchet hubsEnsures the seal is aligned correctly and not damaged during installation,..
£19.99
Ex Tax:£19.99