Wheels Manufacturing TOOL WMfg Thin BB Tool 16-notch/48.5mm
Wheels Manufacturing TOOL WMfg Thin BB Tool 16-notch/48.5mm
£170.76
Ex Tax: £170.76
- Brand: Wheels Manufacturing
- Model: WMTLBBT
- SKU: WMTLBBT
Product Description
Brand: DT Swiss
Genuine DT Swiss replacement Freehub bodyFits 3-Pawl system hubs as found on DT complete wheels and 370 hubs, for freehubs to fit 240, 350 or higher e..
£64.99
Ex Tax:£64.99
Brand: DT Swiss
Essential for rebuilding DT's premium PHR system rimsOnly to be used with DT's PHR system washersThe convex Pro-Head nipples pivot freely in order to ..
£57.00
Ex Tax:£57.00
Brand: DT Swiss
Axle spacer for Ratchet EXP hubs only, will not fit older designs..
£14.00
Ex Tax:£14.00
Brand: DT Swiss
Axle spacer for Ratchet EXP Oversized hubs only, will not fit standard EXP or older designs..
£14.00
Ex Tax:£14.00
Brand: DT Swiss
Suits any Shimano pattern Centre-Lock rotor mount hub and converts it to 6-bolt compatibilityLow profile lockring for tight tolerances as seen on some..
£27.00
Ex Tax:£27.00
Brand: DT Swiss
Suits any Shimano pattern Centre-Lock rotor mount hub and converts it to 6-bolt compatibilityIntegrated speed sensor magnet for E-bike useAllows a fas..
£29.00
Ex Tax:£29.00
Brand: DT Swiss
Genuine DT Swiss replacement partConverts 11-speed rear road hubs into 10 mm bolt-thruPlease refer to the DT Swiss online Product Support Guide for a ..
£58.00
Ex Tax:£58.00
Brand: DT Swiss
Genuine DT Swiss replacement partConverts 11-speed rear road hubs into 10 mm bolt-thruPlease refer to the DT Swiss online Product Support Guide for a ..
£58.00
Ex Tax:£58.00
Brand: DT Swiss
Single cylindrical ratchet spring for Ratchet EXP hubs only, will not fit older designs..
£13.00
Ex Tax:£13.00
Brand: DT Swiss
External thread ring nut for DT 3-Pawl hubsRequires tool HBDT5266 for installation..
£22.00
Ex Tax:£22.00
Brand: DT Swiss
External thread ring nut for older design 340 or 540 hubs which require no spacer between the ring nut and driveside inner hub bearing..
£22.00
Ex Tax:£22.00
Brand: DT Swiss
External thread ring nut for older design 340 or 540 hubs which require no spacer between the ring nut and driveside inner hub bearing..
£22.00
Ex Tax:£22.00