Wheels Manufacturing TOOL WMfg Bike Bearing Press Pro
Wheels Manufacturing TOOL WMfg Bike Bearing Press Pro
£179.09
Ex Tax: £179.09
- Brand: Wheels Manufacturing
- Model: WMTLBBPPK
- SKU: WMTLBBPPK
Brand: DT Swiss
Genuine DT Swiss replacement Freehub bodyFits 3-Pawl system hubs as found on DT complete wheels and 370 hubs, for freehubs to fit 240, 350 or higher e..
£67.00
Ex Tax:£67.00
Brand: DT Swiss
Genuine DT Swiss replacement Freehub bodyFits 3-Pawl system hubs as found on DT complete wheels and 370 hubs, for freehubs to fit 240, 350 or higher e..
£67.00
Ex Tax:£67.00
Brand: DT Swiss
Essential for rebuilding DT's premium PHR system rimsOnly to be used with DT's PHR system washersThe convex Pro-Head nipples pivot freely in order to ..
£44.99
Ex Tax:£44.99
Brand: DT Swiss
Axle spacer for Ratchet EXP hubs only, will not fit older designs..
£11.00
Ex Tax:£11.00
Brand: DT Swiss
Axle spacer for Ratchet EXP Oversized hubs only, will not fit standard EXP or older designs..
£11.00
Ex Tax:£11.00
Brand: DT Swiss
Suits any Shimano pattern Centre-Lock rotor mount hub and converts it to 6-bolt compatibilityLow profile lockring for tight tolerances as seen on some..
£24.99
Ex Tax:£24.99
Brand: DT Swiss
Suits any Shimano pattern Centre-Lock rotor mount hub and converts it to 6-bolt compatibilityIntegrated speed sensor magnet for E-bike useAllows a fas..
£28.00
Ex Tax:£28.00
Brand: DT Swiss
Genuine DT Swiss replacement partConverts 11-speed rear road hubs into 10 mm bolt-thruPlease refer to the DT Swiss online Product Support Guide for a ..
£39.99
Ex Tax:£39.99
Brand: DT Swiss
Genuine DT Swiss replacement partConverts 11-speed rear road hubs into 10 mm bolt-thruPlease refer to the DT Swiss online Product Support Guide for a ..
£39.99
Ex Tax:£39.99
Brand: DT Swiss
Single cylindrical ratchet spring for Ratchet EXP hubs only, will not fit older designs..
£9.00
Ex Tax:£9.00
Brand: DT Swiss
External thread ring nut for DT 3-Pawl hubsRequires tool HBDT5266 for installation..
£19.99
Ex Tax:£19.99
Brand: DT Swiss
External thread ring nut for older design 340 or 540 hubs which require no spacer between the ring nut and driveside inner hub bearing..
£19.99
Ex Tax:£19.99