Frame & Fork Tools
Brand: Park Tool
Model: QK7512
Part number 751.2, 30.1mm reamer is included with HTR-1For headset cups with 30.2mm outside diameter, common on 1" steering column bikes..
£93.00
Ex Tax:£93.00
Brand: Park Tool
Model: QK752
The #752 is used to ream BB30 bottom bracket shells to an ID of 41.94mmMust be used with the HTR-1 Head Tube Reaming and Facing Set with a QK750 centering cone adapter..
£224.99
Ex Tax:£224.99
Brand: Park Tool
Model: QK7542
1-1/8" headtube reamer for use with the Park HTR-1 and HTR-1B headtube facing and reaming setGenuine Park Tool replacement part..
£105.00
Ex Tax:£105.00
Brand: Park Tool
Model: QK756S2
The 756S.2 Reaming Cutter is used to machine head tubes using IS41 or Cane Creek Standard headsets (41mm x 45°)Must be used with the 690-XL Oversized Facer (not included) or the 687 Reamer StopIncludes part #755 Spacer for deeper cuts on lower IS41 headsets..
£184.99
Ex Tax:£184.99
Brand: Park Tool
Model: QK7582
The Park Tool 758.2 will ream and face the head tubes of bikes that use the OnePointFive Interface StandardThe 758.2 is designed for use with the Park Tool HTR-1 or HTR-1B Headtube Facer and ReamerMust also be used with the 750 Centering Cone Adapter to ensure correct alignment1.9516" (49.57mm) diam..
£400.00
Ex Tax:£400.00
Brand: Park Tool
Model: QK761S2
The 761S.2 Reamer is used to machine head tubes using IS42 or Campagnolo®: Standard headset (42mm x 45°)Must be used with the 690-XL Facer (not included) or the 687 Reamer StopIncludes part #755 Spacer for deeper cuts on lower IS42 headsets..
£219.99
Ex Tax:£219.99
Brand: Park Tool
Model: QK764
The #764 pilot is used when facing BB86/92 bottom bracket shells and reaming is not requiredUsed in conjunction with the HTR-1 Head Tube Reaming and Facing Set, 690-XL Facing Cutter and 750.2 Centering Cone Adapter..
£16.00
Ex Tax:£16.00
Brand: Park Tool
Model: QK768
The Park tool 768 is a 43.8mm pilot for facing head tubes using the low profile Zero Stack type headsetThe 768 is used with the 690-XL facer and the 750 centering cone adapterFacing the head tube will improve the alignment of the bearingsThe 768 pilot fits the Park tool HTR-1 Head tube Reamer and Fa..
£27.00
Ex Tax:£27.00
Brand: Park Tool
Model: QK769
For use with the HTR-1 Head tube Reaming and Facing Set, the 769 extends the reaming depth of the 1", 1-1/8" and 1-1/4" Reaming Cutters to 27mmDesigned for head tubes using headsets with deep insertion cups like Chris King Steelset headsets..
£31.00
Ex Tax:£31.00
Brand: Park Tool
Model: QK788
For use with the HTR-1 Head tube Reaming and Facing SetThe 788 reams the headtube to an internal diameter at 43.95mm to accept internal headset cups with 44.05mm-44.10mm outer diameter (1-1/8" ZS standard)..
£112.00
Ex Tax:£112.00