Frame & Fork
Brand: Park Tool
Model: QKCRS1
A fast and precise way to set fork crown races in placeDoes not impact directly against the bearing raceSupplied with three 1" setting rings and three 1-1/8" setting ringsSafer and easier to use than traditional slide hammersMade in the USA and covered by Park Tool's legendary limited lifetime warra..
£89.99
Ex Tax:£89.99
Brand: Park Tool
Model: QKCRS15EXT
The CRS-15EXT includes a tube and fitting to extend any CRS-15 to work on fork steering tubes up to 425mm..
£42.00
Ex Tax:£42.00
Brand: Park Tool
Model: QKCRS2M
The CRS-2M offers a new, safe approach to lower bearing installationThis unique system utilises specially designed, aluminium inserts to quickly and accurately install nearly any lower bearingSimply choose the correct insert, slide the setting driver over the steering tube and tap the bearing into p..
£79.99
Ex Tax:£79.99
Brand: Park Tool
Model: QKDAG22
The DAG-2.2 is an indispensable shop tool that can be used to both measure and straighten misaligned derailleur hangers, solving a high percentage of shifting problemsGauge bar made from heavy gauge, chrome plated steelUpdated with tighter tolerances for improved accuracyAdjusts to fit 20" to 29"+ w..
£84.99
Ex Tax:£84.99
Brand: Park Tool
Model: QKDAG3
An alignment gauge is essential for diagnosing and repairing bent or misaligned derailleur hangers, often the source of shifting problemsThe DAG-3 features an all-new design, engineered and built to be light, accurate and versatileThe sliding indicator can measure derailleur hanger alignment against..
£129.99
Ex Tax:£129.99
Brand: Park Tool
Model: QKDF1
The DF-1 Dummy Fork is an essential companion for any scenario that requires dropping the fork from the bicycle, enabling complete removal of the fork while keeping the handlebars, headset spacers, and brake caliper organizedThe DF-1 installs into the headset and is held in place using the bikes ste..
£49.99
Ex Tax:£49.99
Brand: Park Tool
Model: QKFAG2
Diagnose tracking or gear shifting problems quickly and easilyMeasures frame alignment at the rear dropoutRetractable point allows it to work with all shapes and sizes of frameMade in the USA and covered by Park Tool's legendary limited lifetime warranty..
£54.99
Ex Tax:£54.99
Brand: Park Tool
Model: QKFFG2
Improperly aligned frame and fork dropouts can cause bent axles and quick release skewers, as well as tracking and shifting problemsThe FFG-2 quickly determines whether dropouts are aligned and parallelIf an error is detected, long handles and comfortable moulded grips afford plenty of leverage for ..
£154.99
Ex Tax:£154.99
Brand: Park Tool
Model: QKFFS2
A controlled way to straighten frames, forks, cranks, and handlebars, when feasibleNylon coated hook and fulcrum to prevent paint damageThe hook has up to 8" of adjustment for ideal positioningRe-enforced and super stiff design resists flexingTo be used with care, especially on high-end or thin-wall..
£114.99
Ex Tax:£114.99
Brand: Park Tool
Model: QKFTS1
Designed to cut new threads on fork steerers, or clean up existing threadsExpandable cutting dies are made from the highest quality high speed steel, to ensure a precision cut and a long lifeThe thread guide system allows the metal shavings produced to fall through the guide, preventing damage to th..
£274.99
Ex Tax:£274.99
Brand: Park Tool
Model: QKHTR1B
The HTR-1B combines reaming and/or facing of the head tube to create a perfect fit for most sizes of headset cupsThe HTR-1B comes complete with a 33.8mm reamer, and four different size pilots (29.8mm, 30.0mm, 33.8mm, and 36.8mm)The reamer is used to clean out or increase the diameter of the head tub..
£509.99
Ex Tax:£509.99
Brand: Park Tool
Model: QKHTRHS
The HTR-HS contains the handle (#736), threaded shaft (#739), quick release centering cone assembly (#740), and locking nut (#737) from the Park Tool HTR-1 Head Tube Reaming and Facing SetMade in the USA and covered by Park Tool's legendary limited lifetime warranty..
£269.99
Ex Tax:£269.99