Frame & Fork Tools
Brand: Park Tool
Model: QK690
The 690 facing cutter has an outside diameter of approximately 45mmSuitable for 1", 1-1/8" and 1-1/4" head tubesThe 690 facer is designed to fit HTR-1 Head tube Reamer and Facer, BTS-1 bottom bracket Tap Set and BFS-1 bottom bracket Facing SetAlways use cutting fluid such as Park tool CF-2 when mach..
£119.99
Ex Tax:£119.99
Brand: Park Tool
Model: QK690-XL
Facing improves the alignment of bearings in the headsetThe 690-XL has an approximate diameter of 58mm and is a larger version of the 690 facer for facing head tubes with low profile Zero Stack type headsetsMust be used with the 768 pilot to ensure the frame is reamed and faced accurately..
£150.00
Ex Tax:£150.00
Brand: Park Tool
Model: QK690-XXL
Facing improves the alignment of bearings in the headset, giving a better fit for improved strength and durabilityThe 690-XXL has an approximate diameter of 65mm and is a larger version of the 690 and 690-XL facers for facing 1.5" head tubes with low profile Zero Stack type headsetsMust be used with..
£189.99
Ex Tax:£189.99
Brand: Park Tool
Model: QK692
The 692 is a replacement tap for the BTS-1 Bottom Bracket Tap Set in the 1.370" x 24 TPI left hand threading standardThis tap is used on the drive side (right side) of the bike and uses a counter-clockwise or left hand threading..
£249.99
Ex Tax:£249.99
Brand: Park Tool
Model: QK738
The #738 is used to ream head tubes using the 1.5" integrated headset standardUsed in conjunction with the HTR-1 Head Tube Reaming and Facing Set, 690-XL Facing Cutter and 750.2 Centering Cone AdapterGenuine Park Tool replacement part..
£140.00
Ex Tax:£140.00
Brand: Park Tool
Model: QK744
The #744 is used to ream BB86/92 bottom bracket shells to an inside diameter of 40.98mmUsed in conjunction with the HTR-1 Head Tube Reaming and Facing Set, 690-XL Facing Cutter and 750.2 Centering Cone Adapter..
£140.00
Ex Tax:£140.00
Brand: Park Tool
Model: QK750
The 750.2 Centring cone adapter increases the size of the centering cone of the HTR-1 Head tube Reaming and Facing SetFits headtubes with an inside diameter of 38-60mmSeveral headset standards use large head tube inside diametersThe 750.2 will allow the HTR-1 to be used with the IS (intergrated head..
£36.00
Ex Tax:£36.00