Tyres, Wheels and Hubs

Ring Nut tool required for removing and replacing inner bearings on pawl drive rear hubs, which are located behind the internal ring nutOnly works on Pawl hubs as used on DT complete wheels, for ratchet and aftermarket hubs please use tool HBDT835, for the new Ratchet EXP system please use HBDT6106S..

Ring Nut tool required for removing and replacing inner bearings on ratchet drive rear hubs, which are located behind the internal ring nutOnly works on twin Ratchet drive hubs such as the original 240s and 350 as well as those found on higher end complete wheels, for the new Ratchet EXP system ple..

35 mm bearing installation and removal cylinderPlease consult your wheel's service manual before ordering this tool to see whether it is required..

Long square nipple driver for wheels with square hidden nipples up to 80 mm deepAdjustable depth guide..

Tool kit set for servicing the bearings on 240 front hubs with 15mm front axles..

Tooling for removing and installing the end cap retention rings as used on 15 mm front axle 350 and 370 hubsIncludes drift and guide to ensure perfect alignment when working on these hubs..

Tool kit set for servicing the bearings on 20 mm front axle 350 and 370 hubs..

Tool kit set for servicing the bearings on straight pull 240 hubs, includes all the drifts and guides you need to install and remove the bearings easily and safely..

Tool kit set for servicing the bearings on DT Swiss Predictive Steering front hubs, includes 37 and 27 x 30 mm installation cylinders and a disassembly tool for 18 mm diameter axles..