Park Tool
Brand: Park Tool
Model: QKCBW1C
Compact 8mm and 10mm open ended wrenches provide the most popular bike sizesHigh strength steel with a nickel plate finishPerfect for use on brakes and gearsMade in the USA and covered by Park Tool's legendary limited lifetime warranty..
£9.99
Ex Tax:£9.99
Brand: Park Tool
Model: QKCBW4C
Compact 9mm and 11mm open ended wrenches provide the most popular bike sizesHigh strength steel with a nickel plate finishPerfect for use on brakes and gearsMade in the USA and covered by Park Tool's legendary limited lifetime warranty..
£9.99
Ex Tax:£9.99
Brand: Park Tool
Model: QKCC2
An accurate way to check for wear of roller and pin on chains1% of wear is enough to affect chainrings and sprockets, and allow shifting performance to deteriorateJust insert the chain Checker's pins into two links, press the swing arm gauge, and then check the gauge window for an accurate readingRe..
£26.00
Ex Tax:£26.00
Brand: Park Tool
Model: QKCC3C
A worn chain shifts poorly and wears sprockets at an accelerated rateThe CC-3.2 is a Go / No-Go gauge designed to accurately indicate when a chain reaches 0.5% and 0.75% wear - the point at which most chain manufacturers suggest replacementThe chain should be replaced soon if the 0.75% side fits int..
£10.99
Ex Tax:£10.99
Brand: Park Tool
Model: QKCC4
The CC-4 is a drop-in style gauge that measures bicycle chain wearThe laser cut CC-4 accurately measures a long section of chain and strategically comes in contact with the chain in three places, quickly and easily taking the guesswork out of knowing when chain replacement is necessaryA worn chain w..
£18.00
Ex Tax:£18.00
Brand: Park Tool
Model: QKCC42
A worn bicycle chain causes poor shifting performance and accelerated wear on drivetrain components, causing more expensive problemsThe Park Tool CC-4.2 Chain Checker is a drop-in style gauge that measures bicycle chain wearThe laser-cut CC-4.2 accurately measures a long section of chain and strateg..
£19.00
Ex Tax:£19.00
Brand: Park Tool
Model: QKCCP22C
The benchmark crank puller of the cycle industry for over 25 yearsThe CCP-22 uses a long comfortable handle and extra fine thread that provides the leverage required to remove even the tightest cranksUnique floating-tip design has been updated over the CCP-2 and ensures even smoother operation and l..
£21.99
Ex Tax:£21.99
Brand: Park Tool
Model: QKCCP44C
The CCP-44 Crank Puller is specifically designed to remove crank arms from splined Shimano Octalink and ISIS Drive bottom bracket spindles that do not use a One Key Release systemIt uses a long, comfortable handle and a fine thread for the leverage needed to remove tight crank armsUnique rotating ti..
£21.99
Ex Tax:£21.99
Brand: Park Tool
Model: QKCCW5C
14mm socket and 8mm hex wrench on a long, comfortable handleSuitable for many common square taper crank bolts8mm hex can also be used to install Shimano SPD and SPD-SL pedals that feature an 8mm hex bolt axle designMade in the USA and covered by Park Tool's legendary limited lifetime warranty..
£16.00
Ex Tax:£16.00
Brand: Park Tool
Model: QKCF2
Cutting fluid is essential when cutting, tapping, facing, or reamingExtends the life of your cutting tool, and makes the job easierCan be used on all metals except magnesiumEnvironmentally safe..
£19.00
Ex Tax:£19.00
Brand: Park Tool
Model: QKCG24
A dirty drivetrain causes poor shifting and unnecessary wear to expensive partsThe Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainringsThe Chain Gang includes: CM-5.3 Cyclone™ Chain Scrubber, GSC-1 GearClean™ Brush and 8oz. bottle of..
£36.00
Ex Tax:£36.00
Brand: Park Tool
Model: QKCL12
Reformulated with all PTFE ingredients removed, the Park Tool CL-1.2 retains the all-round performance of the original CL chain lube but in a more environmentally-conscious formulationPenetrates into the links, reducing friction, prolonging component life, displacing moisture, and protecting your ch..
£9.99
Ex Tax:£9.99