Effetto Caffelatex Valve Extension 45mm (x2)

Extremely easy to use compared to mastic.
Very reliable adhesion, in any condition.
Once removed, Carogna leaves the rim ready for the next gluing, without additional cleaning.
Works for road and Cyclocross.
Also available in very convenient Shop Rolls.

The tape has two application-specific sides:
Semi-structural and removable on the rim-side: adhesion is guaranteed by industrial-grade acrylic glue, native to the base tape; this means that when removing the tubular (breaking its bond with the rim), the acrylic glue will stay on the tape, not on the rim. Acrylic has a good adhesion on both aluminium and carbon without any specific surface preparation.Permanent on the tubular side: there’s a 1mm-thick layer of a recently-developed permanent glue for underwater applications. This thick glue film will move and spread when the tubular is first inflated, ensuring optimized contact with any tubular base tape geometry. Humidity is obviously not an issue, and this glue adheres well to any kind of base tape material (nylon, cotton, poly-cotton) or external finishing (raw, brushed, or coated by neoprene).

Wide temperature range in use:
once adhesion is set, the use at low temperatures (down to -40°C) is not a problem. Thermal resistance of all materials used in the manufacture of Carogna was a high priority: Carogna will provide a perfect bonding at 150°C for extended periods (hours), exceeding the heat-resistance of even the best mastics and widely exceeding the heat-resistance of any other tubular tape.

Optimized adhesive surface:
adhesion is very strong and uniform across the whole circumference of the rim for all tubulars and it is also uniform across the tubular base tape. One short-coming of tubular tape to-date has been limited adhesion at the edges of the base tape or in the centre of tubulars with a raised centre seam. Carogna solves these problems.

Temperature range when mounting:
the ideal thermal range for application of Carogna is between 21°C and 38°C (70 to 100°F), allowing 8 hours to reach 80% of the adhesive strength. Applying the tape below 10°C is not recommended.

We recommend cleaning surfaces (rim and tubular base tape) using iso-propylic alcohol or mineral spirits.